Environmental Compliance Certificates

RoHS3 10/10

All standard parts* manufactured by Johanson Dielectrics, Inc. after January 1, 2006 are fully compliant to the European Union Directives 2002/95/EC, 2011/65/EU and Annex II (EU) 2015/863 of the European Parliament and of the Council of 31 March 2015 on the Restriction of the use of certain Hazardous Substances in electrical and electronics equipment (RoHS Directives).


All parts (articles) manufactured by Johanson Dielectrics meet the requirements for REACH and do not contain any of the SVHC chemicals listed above the levels mandated by the ECHA.

Lead-Free Terminations

All standard terminations (JDI termination code "V") of our SMT components consist of 100% Tin plating in a matte finish over Nickel. Components with these terminations are capable of a 260°C maximum reflow temperature for a duration of 5 seconds and compatible with most common lead-free solder processes. Tin Whisker test results are published in the Johanson Technical Note: Tin Whisker Testing

*Sn-Pb Terminations

In response to specific industry and customer requests, Johanson Dielectrics produces a limited amount of product featuring Tin-Lead (Sn-Pb) Terminations (JDI termination code "T".) This product is non-RoHS compliant due to the Pb constituent in the termination as required in certain specialty applications e.g. Military & Space.

Legacy RoHS Compliant P/N Suffix

In 2005 a Johanson part number suffix of "-****-RC" was implemented to assist customers in identifying compliant and non-compliant inventory during their transition to RoHS compliancy. The "RC" suffix is no longer necessary to ensure compliance and should not be utilized for new designs. JDI will continue to support these legacy part numbers for the benefit of customers with these part numbers on current AVLs / BOM’s.

Conflict Minerals Reporting

In response to the worldwide determination to limit funding of human rights violations in the Democratic Republic of the Congo (DRC), Johanson Dielectrics (JDI) ensures that our products do not contain the “conflict minerals” of tungsten, tantalum, tin, and gold supplied by the DRC and their neighboring countries. JDI has verified through our suppliers that their smelters and refiners produce Conflict Free Minerals. JDI participates in the generation of lists of Conflict Free Mineral Smelters and Refineries started by the Security and Exchange Commission.

Responsible Business Alliance Code of Conduct

Johanson companies, Johanson Dielectrics Inc. and Johanson Technology Inc., declare our full support for and will actively pursue conformance to the Responsible Business Alliance Code of Conduct for our employees, supply chain, and subcontractors, including providers of contract labor.
  Read More

Notification of Affirmative Action Obligations to Subcontractors, Vendors and Suppliers

Johanson Dielectrics is a subcontractor and complies with the following affirmative action regulations:
  • Executive Order 11246, as amended (41 CFR chapter 60)
  • Section 503 of the Rehabilitation Act of 1973, as amended, 38 (41 CFR 60-741)
  • Vietnam Era Veterans’ Readjustment Assistance Act of 1974, as amended, 38 USC s4212 (41 CFR 60-300)
In compliance with these regulations, Johanson Dielectrics hereby notifies you that as our subcontractor, vendor, or supplier, you organization may also be subject to the regulations outlined above.

The equal employment opportunity clauses set forth in 41 CFR s60-1.4(a), 41 CFR s60-300(a) and 41 CFR s60-741.5(a) are included by reference into all of the transactions between our companies.

We appreciate your cooperation in our effort to fully comply with these federal requirements.